Skip to content
★★★★★ 4.9 (625 Google reviews) · Marietta shop · 📞 (678) 400-6467 · 🗺️ Get Directions · Live From The Shop
Google ★★★★★ Loading recent review… See all 625 →
Cart

Ram 2500 Wheels

Fitment by Year

RAM 2500s from 2011 through 2027 roll on an 8x165.1 bolt pattern with a 121.3mm hub bore, and OE rim diameters run anywhere from 17 inches up to 30 inches depending on your year and trim. I keep the common sizes on the rack—17s, 20s, and 22s are what I see most—but I can source whatever diameter and offset your truck needs.

When you come in, I'm looking at what you've got now and what you want to run. OE-style replacements in gloss black or machined finish are straightforward swaps; if you're going plus-size, I make sure the offset clears your brakes and suspension without rubbing. LT245/70-17, LT285/70-17, LT275/70-18, LT285/60-20—I've mounted all of these on 2500s. The hub bore is tight at 121.3mm, so I use spigot rings to center everything properly and keep vibration out.

My crew runs road-force balance on every wheel, reseats and re-codes the TPMS sensors, and torques the lugs to spec. I've been doing this in Marietta for fifteen years, and I do every install in-house—no outsourcing, no guessing. We're bilingual, walk-ins are welcome, and I answer the phone myself.

We mount these for folks across Marietta, East Cobb, and the broader Atlanta area. If you need financing, Synchrony Car Care runs a 6-month promo on purchases over $199, and Acima lets you lease-to-own starting at $10. Walk in at 1585 Roswell Rd, call 678-400-6467, or book online below.

Need help picking a wheel? Our team can match the right offset, hub bore, and finish for your build.

Call (678) 400-6467

Pro Installation

Mount, balance, and TPMS programming handled in-shop at our Marietta location on Roswell Rd. We pair wheels with matching tires when needed.

Financing & Leasing

Synchrony Car Care for 6-month promotional financing on $199+ and Acima lease-to-own with as little as $10 to start.

Hub-Centric Fit

Hub bore measured, spigot rings supplied where needed, lug torque to spec — no vibration, no return trips.

What we double-check on Ram 2500

  • Lifted, leveled, or stock — we measure backspacing and confirm the size clears at full lock, not just rolling down the freeway.
  • Bolt-pattern, hub bore, and load rating verified against the build. Hub-centric rings supplied where needed.
  • TPMS reset done on every install. Bring the lug key if you have aftermarket locks.

Common questions about Ram 2500 wheels

What's the bolt pattern on a RAM 2500?
8x165.1. That's eight lugs spaced 165.1mm apart. Hub bore is 121.3mm, so I always use spigot rings to center the wheel properly and avoid vibration.
Will these wheels fit my 2500?
If it's a 2011 or newer 2500, yes—same bolt pattern across the whole lineup. I just need to know your year and what size you're running now so I can match the offset and diameter to your truck's suspension and brakes.
Can I go plus-size on my RAM 2500?
Absolutely. I see a lot of 2500s running 22s and 24s. I check your brake clearance and make sure the offset doesn't rub the suspension or fender. We'll dial in what works for your setup.
Do you install wheels same-day?
Most of the time, yes. I run road-force balance, TPMS reseat, and lug torque to spec on every install. Call ahead if you're coming in with a set already in hand, and I'll let you know the timeline.
Can I finance wheels at Road Runner?
Yes. Synchrony Car Care offers a 6-month promo on purchases over $199, and Acima lets you lease-to-own starting at $10. Both are available in-shop.

Ready to get rolling?

Book online with the ShopMonkey scheduler, walk in to 1585 Roswell Rd, or give us a call.

Choose Your Option

Financing and Leasing
Options Available

Two purpose-built ways to put new wheels on your 2500 without the interest hit.

Lease-to-Own

Acima Leasing

Lease-to-Own · Approval in Minutes

90 Days

No Interest if Paid in Full

Lease-to-own program through Acima. As little as $10 to start. Up to $5,000 in approved shopping power. Subject to approval.

Apply Now

Credit Application

Synchrony Car Care

Credit Card · Promotional Financing

6 Months

No Interest if Paid in Full on $199+

Use your Synchrony Car Care card at Road Runner for wheels, tires, lift kits, and installation. Get 6 months promotional financing on purchases of $199 or more — pay your balance in full before the promo period ends to avoid interest. Subject to credit approval.

Apply Now

Hablamos Español · Call 678-400-6467 · Walk-ins Welcome at 1585 Roswell Rd, Marietta, GA

Family-owned · Marietta · Since 2010

Built and run by Max Caba and a small team of techs.

We don't outsource installs and we don't sell wheels we wouldn't put on our own trucks. Every wheel goes on with a torque wrench and a road-force balance, every TPMS sensor gets reset before you drive off, and every fitment question gets answered by someone who'll be here next week when you call back.

Fifteen years of doing it the same way — that's the whole pitch. We're a small shop on Roswell Road, not a chain, not a call center. Walk in and you'll meet the same techs who'll touch your truck.

15 years in Marietta
1 family-owned shop · no chains
100% in-house installs · road-force balance
★★★★★ 4.9 (625 Google reviews)

Road Runner Wheels & Tires
1585 Roswell Rd, Marietta, GA 30062

Open today
Mon 9–5 · Tue–Fri 9–5:30 · Sat 9–5 · Sun closed