Nissan Versa Wheels
Fitment by Year
OE Versa runs a 4x100 bolt pattern with a 59.1mm hub bore and rides on 17-inch rims from the factory — and I've been fitting wheels on these cars since we opened in 2010. They're lightweight platforms, so sidewall flex and offset matter more than folks think. I see a lot of owners wanting to go plus-size without understanding how that changes the speedometer reading and ride feel, so I always dial in the specs before we order.
For a Versa, I stock both OE-style replacements and upgrades in 17 and 18-inch sizes — gloss black, machined silver, bronze finishes depending on what's in. If you're going up a half-inch, we need to watch the brake clearance and keep the offset in the 38–48mm range to stay hub-centric and avoid rubbing. The 4x100 pattern is tight, so I've got a few go-to brands I trust on these because cheap offset specs will kill your suspension geometry.
Every wheel that leaves here gets road-force balanced — I run that machine on every one, no shortcuts. My crew checks hub-centric fit with spigot rings, reseats and recodes the TPMS, and torques the lugs to Nissan spec. We're bilingual, walk-ins are welcome, and we've been in Marietta fifteen years, so I know the roads and the cars people are driving here. You're not dealing with a call center; I'm the one answering the phone at (678) 400-6467.
We mount these for folks across Marietta, East Cobb, and into Sandy Springs. Synchrony financing starts at $199 for six months promo, and if you need lease-to-own, Acima gets you rolling for ten bucks down. Walk in, call, or book online below.
Need help picking a wheel? Our team can match the right offset, hub bore, and finish for your build.
Call (678) 400-6467Pro Installation
Mount, balance, and TPMS programming handled in-shop at our Marietta location on Roswell Rd. We pair wheels with matching tires when needed.
Financing & Leasing
Synchrony Car Care for 6-month promotional financing on $199+ and Acima lease-to-own with as little as $10 to start.
Hub-Centric Fit
Hub bore measured, spigot rings supplied where needed, lug torque to spec — no vibration, no return trips.
What we double-check on Nissan Versa
- Staggered fitments (different front/rear sizes) are common — we confirm offsets and brake clearance before mounting.
- Hub-centric fit verified on every wheel. UHP brake calipers checked against the inside spoke clearance.
- Track-prepped vehicles get torqued to spec twice — once at mount and once after a 25-mile heat cycle.
Common questions about Nissan Versa wheels
What's the bolt pattern on a Nissan Versa?
4x100. That's four lugs on a 100mm circle. Hub bore is 59.1mm. I keep spigot rings on hand for all fitments because a loose fit will cause vibration and throw off your balance.
Can I fit 18-inch wheels on my Versa?
Yes, but you need to watch the offset. I typically run 38–48mm offset to keep the wheel hub-centric and avoid rubbing the suspension or brake components. We check all that before you drive off the lot.
Do you install wheels same-day?
Most of the time, yes. Depends on how busy we are and whether we've got the right tire in stock. Call or walk in and I'll give you a real answer, not a maybe.
Can I finance wheels at Road Runner?
Synchrony Car Care for six months on purchases $199 and up, or Acima lease-to-own starting at ten dollars down. We'll run the numbers with you on the spot.
Ready to get rolling?
Book online with the ShopMonkey scheduler, walk in to 1585 Roswell Rd, or give us a call.
Choose Your Option
Financing and Leasing
Options Available
Two purpose-built ways to put new wheels on your Versa without the interest hit.
Lease-to-Own
Acima Leasing
Lease-to-Own · Approval in Minutes
90 Days
No Interest if Paid in Full
Lease-to-own program through Acima. As little as $10 to start. Up to $5,000 in approved shopping power. Subject to approval.
Apply NowCredit Application
Synchrony Car Care
Credit Card · Promotional Financing
6 Months
No Interest if Paid in Full on $199+
Use your Synchrony Car Care card at Road Runner for wheels, tires, lift kits, and installation. Get 6 months promotional financing on purchases of $199 or more — pay your balance in full before the promo period ends to avoid interest. Subject to credit approval.
Apply NowHablamos Español · Call 678-400-6467 · Walk-ins Welcome at 1585 Roswell Rd, Marietta, GA
Family-owned · Marietta · Since 2010
Built and run by Max Caba and a small team of techs.
We don't outsource installs and we don't sell wheels we wouldn't put on our own trucks. Every wheel goes on with a torque wrench and a road-force balance, every TPMS sensor gets reset before you drive off, and every fitment question gets answered by someone who'll be here next week when you call back.
Fifteen years of doing it the same way — that's the whole pitch. We're a small shop on Roswell Road, not a chain, not a call center. Walk in and you'll meet the same techs who'll touch your truck.
15
years in Marietta
1
family-owned shop · no chains
100%
in-house installs · road-force balance
Road Runner Wheels & Tires
1585 Roswell Rd, Marietta, GA 30062
Open today
Mon 9–5 · Tue–Fri 9–5:30 · Sat 9–5 · Sun closed
Mon 9–5 · Tue–Fri 9–5:30 · Sat 9–5 · Sun closed
Sign in to your garage
Save your vehicles, favorite wheels and orders across all your devices.
Where are we shipping to?
Enter your ZIP code to see accurate delivery times, local install scheduling, and local warehouse inventory.
Please enter a 5-digit ZIP code.