Nissan Sentra Wheels

I've been mounting wheels on Sentras since we opened in 2010, and I can tell you the fitment is straightforward once you know what you're working with. Your Sentra runs a 5x114.3 bolt pattern with a 66.10mm hub bore, and OE rim diameter sits between 16 and 18 inches depending on your year and trim. Most come in on 16s or 17s, and that's what I keep on the rack.

We stock both OE-style replacements and plus-size upgrades for your Sentra. You can go 16, 17, or 18 inch — just depends on what look you want and what your brake clearance allows. I've got options in gloss black, machined finishes, and bronze if you're after something with a little character. The offset and width matter here too; I always check that the wheel sits flush in the fender and doesn't rub the strut or caliper. If you're thinking about a plus-one or plus-two setup, we'll dial in the specs so everything clears.

When your wheels come in, my crew runs them through the full process. I check hub-centric fit first — that spigot ring has to seat right on your hub, not the lug nuts. We re-seat and re-code your TPMS sensors, road-force balance every wheel, and torque the lugs to Nissan spec. Been doing this for fifteen years in Marietta, and it's the same careful work every time. We're bilingual, walk-ins are welcome, and you can watch the install from the bay if you want.

We mount these for folks across Marietta, East Cobb, and the broader Atlanta side. If you need financing, Synchrony gives you six months on anything over $199, and Acima lets you lease-to-own starting at ten bucks. Walk in at 1585 Roswell Rd, call 678-400-6467, or book online.