Mercury Grand Marquis Wheels
Fitment by Year
I see a lot of '90s and 2000s Grand Marquis come through here—folks who've kept them clean, maintained them right, and now want to refresh the look without breaking the bank. Your '92–'11 rides on a 5x114.3 bolt pattern with a 70.50mm hub bore, and most OE setups run a 17-inch rim with a 225/60 tire. That's a solid platform, and there's real room to upgrade without fighting fitment issues.
We stock both straight replacements—gloss black or machined finishes that match the OE look—and plus-size options if you want to go 18-inch with a slightly lower-profile tire. The key is brake clearance; I keep an offset calculator on the counter because a Grand Marquis needs that spigot ring to sit flush on the hub, and the wrong backspace will rub the caliper. We carry sizes in 17 and 18, and I can show you which finishes work best with your paint when you come in.
Once you pick a set, my crew handles the full install in-house. We run a hub-centric spigot ring on every one, reseat and re-code the TPMS sensors, road-force balance the tires, and torque the lugs to spec. I've been doing this in Marietta for fifteen years—it's just how we do it. We're bilingual, walk-ins are always welcome, and if you need to grab a coffee while we work, you're two minutes from the plaza.
We mount these for folks across Marietta, East Cobb, and Roswell. If you're financing, Synchrony runs a 6-month promo on purchases over $199, and Acima lets you start for $50. Walk in at 1585 Roswell Rd, call 678-400-6467, or book online below.
Need help picking a wheel? Our team can match the right offset, hub bore, and finish for your build.
Call (678) 400-6467Popular wheels for the Mercury Grand Marquis
In-stock wheels on the 5x114.3 bolt pattern. Pick your year and trim above to confirm offset and hub bore for your exact truck before you buy.
See all 1 5x114.3 wheels →
Pro Installation
Mount, balance, and TPMS programming handled in-shop at our Marietta location on Roswell Rd. We pair wheels with matching tires when needed.
Financing & Leasing
Synchrony Car Care for 6-month promotional financing on $199+ and Acima lease-to-own with as little as $10 to start.
Hub-Centric Fit
Hub bore measured, spigot rings supplied where needed, lug torque to spec — no vibration, no return trips.
What we double-check on Mercury Grand Marquis
- Staggered fitments (different front/rear sizes) are common — we confirm offsets and brake clearance before mounting.
- Hub-centric fit verified on every wheel. UHP brake calipers checked against the inside spoke clearance.
- Track-prepped vehicles get torqued to spec twice — once at mount and once after a 25-mile heat cycle.
Common questions about Mercury Grand Marquis wheels
What's the bolt pattern on a Mercury Grand Marquis?
All Grand Marquis from '92 to 2011 run 5x114.3. That's the same pattern as a lot of Ford full-size sedans from that era, so you've got decent aftermarket options. Hub bore is 70.50mm, so make sure any wheel you buy specifies that or is hub-centric.
Can I fit 18-inch wheels on my Grand Marquis?
Yes. OE is typically 17-inch, but an 18-inch wheel works fine if the offset is right. I usually recommend staying between +35 and +50 offset to keep brake clearance and the wheel tucked under the fender. Come by and we'll mock it up.
Do you install wheels same-day?
Most of the time, yes. If you bring the tires or we have them in stock, my crew can mount, balance, and torque everything in a couple hours. Call ahead if you want to be sure we're not slammed.
Can I finance wheels at Road Runner?
We work with Synchrony Car Care—6 months interest-free on orders over $199—and Acima for lease-to-own starting at $10. Either way, you leave with your wheels on the same day.
Ready to get rolling?
Book online with the ShopMonkey scheduler, walk in to 1585 Roswell Rd, or give us a call.
Choose Your Option
Financing and Leasing
Options Available
Two purpose-built ways to put new wheels on your Grand Marquis without the interest hit.
Lease-to-Own
Acima Leasing
Lease-to-Own · Approval in Minutes
90 Days
No Interest if Paid in Full
Lease-to-own program through Acima. As little as $10 to start. Up to $5,000 in approved shopping power. Subject to approval.
Apply NowCredit Application
Synchrony Car Care
Credit Card · Promotional Financing
6 Months
No Interest if Paid in Full on $199+
Use your Synchrony Car Care card at Road Runner for wheels, tires, lift kits, and installation. Get 6 months promotional financing on purchases of $199 or more — pay your balance in full before the promo period ends to avoid interest. Subject to credit approval.
Apply NowHablamos Español · Call 678-400-6467 · Walk-ins Welcome at 1585 Roswell Rd, Marietta, GA
Family-owned · Marietta · Since 2010
Built and run by Max Caba and a small team of techs.
We don't outsource installs and we don't sell wheels we wouldn't put on our own trucks. Every wheel goes on with a torque wrench and a road-force balance, every TPMS sensor gets reset before you drive off, and every fitment question gets answered by someone who'll be here next week when you call back.
Fifteen years of doing it the same way — that's the whole pitch. We're a small shop on Roswell Road, not a chain, not a call center. Walk in and you'll meet the same techs who'll touch your truck.
15
years in Marietta
1
family-owned shop · no chains
100%
in-house installs · road-force balance
Road Runner Wheels & Tires
1585 Roswell Rd, Marietta, GA 30062
Open today
Mon 9–5 · Tue–Fri 9–5:30 · Sat 9–5 · Sun closed
Mon 9–5 · Tue–Fri 9–5:30 · Sat 9–5 · Sun closed
Sign in to your garage
Save your vehicles, favorite wheels and orders across all your devices.
Where are we shipping to?
Enter your ZIP code to see accurate delivery times, local install scheduling, and local warehouse inventory.
Please enter a 5-digit ZIP code.