Mercury Cougar Wheels
Fitment by Year
Mercury Cougar runs a 4x108 bolt pattern with a 63.4mm hub bore, and the OE rim diameter sits anywhere from 15 inches up to 20 inches depending on your year and trim. I've had everything from a '67 to a 2002 roll through here, and what I've learned is that the hub-centric fit matters more on these than folks realize—the spigot ring has to seat flush, or you'll get vibration at highway speeds that no amount of balancing fixes.
We keep 15, 16, 17, 18, and 20-inch options on the rack for Cougar fitment. If you want to stay OE-spec, I can match your original diameter and finish—gloss black, machined, polished, whatever suits the car. But most folks who walk in here are thinking about a plus-size upgrade: maybe a 17 or 18 in place of the factory 15 or 16. That works fine as long as we dial in the offset and make sure your brake calipers clear. I run the numbers before you buy, and I'll show you the math on the wall.
Once we've got your wheels sorted, my crew handles the full install in-house. We check the hub-centric fit, seat the spigot ring, rebalance and road-force every wheel, reseat and re-code the TPMS sensors, and torque the lugs to spec. I've been doing this in Marietta for fifteen years—it's just how we work. We're bilingual, walk-ins are always welcome, and if you've got questions while I'm pulling your car in, I'll walk you through the whole fitment.
We mount these for folks across Marietta, Roswell, Kennesaw, and Sandy Springs. Synchrony financing runs 6 months promo on orders $199 and up, and Acima lease-to-own starts at $50. Walk in at 1585 Roswell Rd, call (678) 400-6467, or book online below.
Need help picking a wheel? Our team can match the right offset, hub bore, and finish for your build.
Call (678) 400-6467Pro Installation
Mount, balance, and TPMS programming handled in-shop at our Marietta location on Roswell Rd. We pair wheels with matching tires when needed.
Financing & Leasing
Synchrony Car Care for 6-month promotional financing on $199+ and Acima lease-to-own with as little as $10 to start.
Hub-Centric Fit
Hub bore measured, spigot rings supplied where needed, lug torque to spec — no vibration, no return trips.
What we double-check on Mercury Cougar
- Staggered fitments (different front/rear sizes) are common — we confirm offsets and brake clearance before mounting.
- Hub-centric fit verified on every wheel. UHP brake calipers checked against the inside spoke clearance.
- Track-prepped vehicles get torqued to spec twice — once at mount and once after a 25-mile heat cycle.
Common questions about Mercury Cougar wheels
What's the bolt pattern on a Mercury Cougar?
All Cougars from 1967 to 2002 are 4x108. Hub bore is 63.4mm. That's the spec I use every time we fit a wheel to one of these cars.
Will these wheels fit my Cougar?
If the wheel is 4x108 with the right offset and rim diameter for your year, it'll fit. I check hub-centric clearance and brake caliper space before you leave. Come in with your VIN or year, and I'll confirm the exact setup.
Can I go up a size from the factory wheel?
Yeah, you can. OE Cougar wheels run 15 to 20 inches depending on the year. If you want to bump up from a 15 to a 17, or a 16 to an 18, I'll make sure the offset clears your brakes and the sidewall doesn't rub. I've done plenty of upgrades on these.
Do you install wheels same-day?
Most of the time, yes. I mount, balance, road-force, and code the sensors in-house. Call ahead if you're bringing in a set, and I'll give you a real timeline.
Can I finance wheels?
Synchrony Car Care is 6 months promo on $199 and up. Acima lease-to-own starts at $50. Both work. Ask when you call or stop by.
Ready to get rolling?
Book online with the ShopMonkey scheduler, walk in to 1585 Roswell Rd, or give us a call.
Choose Your Option
Financing and Leasing
Options Available
Two purpose-built ways to put new wheels on your Cougar without the interest hit.
Lease-to-Own
Acima Leasing
Lease-to-Own · Approval in Minutes
90 Days
No Interest if Paid in Full
Lease-to-own program through Acima. As little as $10 to start. Up to $5,000 in approved shopping power. Subject to approval.
Apply NowCredit Application
Synchrony Car Care
Credit Card · Promotional Financing
6 Months
No Interest if Paid in Full on $199+
Use your Synchrony Car Care card at Road Runner for wheels, tires, lift kits, and installation. Get 6 months promotional financing on purchases of $199 or more — pay your balance in full before the promo period ends to avoid interest. Subject to credit approval.
Apply NowHablamos Español · Call 678-400-6467 · Walk-ins Welcome at 1585 Roswell Rd, Marietta, GA
Family-owned · Marietta · Since 2010
Built and run by Max Caba and a small team of techs.
We don't outsource installs and we don't sell wheels we wouldn't put on our own trucks. Every wheel goes on with a torque wrench and a road-force balance, every TPMS sensor gets reset before you drive off, and every fitment question gets answered by someone who'll be here next week when you call back.
Fifteen years of doing it the same way — that's the whole pitch. We're a small shop on Roswell Road, not a chain, not a call center. Walk in and you'll meet the same techs who'll touch your truck.
15
years in Marietta
1
family-owned shop · no chains
100%
in-house installs · road-force balance
Road Runner Wheels & Tires
1585 Roswell Rd, Marietta, GA 30062
Open today
Mon 9–5 · Tue–Fri 9–5:30 · Sat 9–5 · Sun closed
Mon 9–5 · Tue–Fri 9–5:30 · Sat 9–5 · Sun closed
Sign in to your garage
Save your vehicles, favorite wheels and orders across all your devices.
Where are we shipping to?
Enter your ZIP code to see accurate delivery times, local install scheduling, and local warehouse inventory.
Please enter a 5-digit ZIP code.