Mazda CX-7 Wheels
Fitment by Year
Between 2007 and 2012, Mazda built the CX-7 on a 5x114.3 bolt pattern with a 67.1mm hub bore, and we've mounted plenty of them over the years. OE sizes run anywhere from 17 to 20 inches in diameter—most come in on 235/55-19, 235/60-18, or 215/70-17. I keep a good stock of replacements and upgrades in those sizes, so whether you need a straight OE swap or want to go plus-size, we can dial it in.
For the CX-7, I typically recommend staying in the 17 to 20 inch range to keep your speedo honest and your ride predictable. We carry gloss black, machined, and bronze finishes—a lot of CX-7 owners like the sportier look, and I've got offset options (usually +35 to +50) that clear the brakes without rubbing. If you're running a bigger wheel, we'll check your clearance to the caliper and suspension before we touch anything.
Once you pick your setup, my crew handles everything in-house. We run a hub-centric fit on every install, seat the TPMS sensors, balance each wheel on the road-force machine, and torque your lugs to spec. I've been doing this work in Marietta for fifteen years with the same small team, and we take our time. Walk-ins are always welcome, and we're bilingual if that helps.
We mount these for folks across Marietta, East Cobb, and Roswell. If you need financing, we work with Synchrony Car Care (6-month promo on $199+) and Acima ($50 to start). Call me at 678-400-6467, stop by 1585 Roswell Rd, or book online below.
Need help picking a wheel? Our team can match the right offset, hub bore, and finish for your build.
Call (678) 400-6467Popular wheels for the Mazda CX-7
In-stock wheels on the 5x114.3 bolt pattern. Pick your year and trim above to confirm offset and hub bore for your exact truck before you buy.
See all 1 5x114.3 wheels →
Pro Installation
Mount, balance, and TPMS programming handled in-shop at our Marietta location on Roswell Rd. We pair wheels with matching tires when needed.
Financing & Leasing
Synchrony Car Care for 6-month promotional financing on $199+ and Acima lease-to-own with as little as $10 to start.
Hub-Centric Fit
Hub bore measured, spigot rings supplied where needed, lug torque to spec — no vibration, no return trips.
What we double-check on Mazda CX-7
- Staggered fitments (different front/rear sizes) are common — we confirm offsets and brake clearance before mounting.
- Hub-centric fit verified on every wheel. UHP brake calipers checked against the inside spoke clearance.
- Track-prepped vehicles get torqued to spec twice — once at mount and once after a 25-mile heat cycle.
Common questions about Mazda CX-7 wheels
What's the bolt pattern on a 2007–2012 Mazda CX-7?
5x114.3. That's what we spec every time. Hub bore is 67.1mm, so we use a spigot ring to center the wheel if you're going aftermarket. I've got sizes from 17 to 20 inches in stock.
Will these wheels fit my CX-7?
If your CX-7 is 2007–2012 and you're staying in the 17 to 20 inch diameter range, yes. We'll double-check your offset and brake clearance before install. Bring your car in or call with your current setup, and I'll confirm fitment in two minutes.
Do you install wheels same-day?
Usually, yes. We mount, balance on the road-force, seat your TPMS, and torque everything to spec in-house. Walk-ins are fine. Call 678-400-6467 if you want to confirm timing.
Can I finance wheels and tires?
Yeah. Synchrony Car Care runs a 6-month promo on purchases $199 and up, and Acima lets you lease-to-own starting at $10. We'll walk you through both at the shop.
Ready to get rolling?
Book online with the ShopMonkey scheduler, walk in to 1585 Roswell Rd, or give us a call.
Choose Your Option
Financing and Leasing
Options Available
Two purpose-built ways to put new wheels on your CX-7 without the interest hit.
Lease-to-Own
Acima Leasing
Lease-to-Own · Approval in Minutes
90 Days
No Interest if Paid in Full
Lease-to-own program through Acima. As little as $10 to start. Up to $5,000 in approved shopping power. Subject to approval.
Apply NowCredit Application
Synchrony Car Care
Credit Card · Promotional Financing
6 Months
No Interest if Paid in Full on $199+
Use your Synchrony Car Care card at Road Runner for wheels, tires, lift kits, and installation. Get 6 months promotional financing on purchases of $199 or more — pay your balance in full before the promo period ends to avoid interest. Subject to credit approval.
Apply NowHablamos Español · Call 678-400-6467 · Walk-ins Welcome at 1585 Roswell Rd, Marietta, GA
Family-owned · Marietta · Since 2010
Built and run by Max Caba and a small team of techs.
We don't outsource installs and we don't sell wheels we wouldn't put on our own trucks. Every wheel goes on with a torque wrench and a road-force balance, every TPMS sensor gets reset before you drive off, and every fitment question gets answered by someone who'll be here next week when you call back.
Fifteen years of doing it the same way — that's the whole pitch. We're a small shop on Roswell Road, not a chain, not a call center. Walk in and you'll meet the same techs who'll touch your truck.
15
years in Marietta
1
family-owned shop · no chains
100%
in-house installs · road-force balance
Road Runner Wheels & Tires
1585 Roswell Rd, Marietta, GA 30062
Open today
Mon 9–5 · Tue–Fri 9–5:30 · Sat 9–5 · Sun closed
Mon 9–5 · Tue–Fri 9–5:30 · Sat 9–5 · Sun closed
Sign in to your garage
Save your vehicles, favorite wheels and orders across all your devices.
Where are we shipping to?
Enter your ZIP code to see accurate delivery times, local install scheduling, and local warehouse inventory.
Please enter a 5-digit ZIP code.