Mazda CX-3 Wheels
Fitment by Year
We've had a lot of 2016 to 2021 CX-3s roll through the bay over the years, and I can tell you exactly what fits: 5x114.3 bolt pattern, 67.1mm hub bore, and OE sizes running 215/65-16 on the base setup or 215/55-18 if you went with the sport trim. You're looking at a 16- to 19-inch rim diameter range depending on what you want to run.
I keep both OE-style replacements and plus-size upgrades on the rack for this platform. If you want to stick with the factory look, I've got 16-inch and 18-inch options in gloss black and machined finishes that bolt right on. But if you're thinking about going a step up—maybe an 18 or 19-inch setup with a wider tire—we can do that too. The CX-3 sits pretty nimble, so offset matters; I usually recommend something in the 35 to 45mm range to keep the wheels tucked and avoid rubbing the strut. Brake clearance is tight on the sport models, so I always verify fitment before you leave.
Once you pick your wheels, my crew handles the full install in-house. I run road-force balance on every one, reseat and re-code the TPMS sensors, torque the lugs to Mazda spec, and check that hub-centric fit. We're bilingual here, walk-ins are always welcome, and I've been doing this work in Marietta for fifteen years now—not a chain, not a franchise. It's just me and the team making sure your wheels are on right.
We mount these for folks across Marietta, East Cobb, and the broader Atlanta area. If you want to finance, we've got Synchrony Car Care (6-month promo on $199 and up) and Acima lease-to-own starting at $10 down. Walk in at 1585 Roswell Rd, call (678) 400-6467, or book online below.
Need help picking a wheel? Our team can match the right offset, hub bore, and finish for your build.
Call (678) 400-6467Popular wheels for the Mazda CX-3
In-stock wheels on the 5x114.3 bolt pattern. Pick your year and trim above to confirm offset and hub bore for your exact truck before you buy.
See all 1 5x114.3 wheels →
Pro Installation
Mount, balance, and TPMS programming handled in-shop at our Marietta location on Roswell Rd. We pair wheels with matching tires when needed.
Financing & Leasing
Synchrony Car Care for 6-month promotional financing on $199+ and Acima lease-to-own with as little as $10 to start.
Hub-Centric Fit
Hub bore measured, spigot rings supplied where needed, lug torque to spec — no vibration, no return trips.
What we double-check on Mazda CX-3
- Staggered fitments (different front/rear sizes) are common — we confirm offsets and brake clearance before mounting.
- Hub-centric fit verified on every wheel. UHP brake calipers checked against the inside spoke clearance.
- Track-prepped vehicles get torqued to spec twice — once at mount and once after a 25-mile heat cycle.
Common questions about Mazda CX-3 wheels
What's the bolt pattern on a 2016–2021 Mazda CX-3?
5x114.3. Hub bore is 67.1mm. That's consistent across the whole run of those model years, so any wheel I fit for you will bolt on clean without adapters.
Will these wheels fit my CX-3?
If your CX-3 is 2016 to 2021, yes. I verify fitment against your exact trim and year—especially brake clearance on the sport models. Bring the car by or send me the year and trim, and I'll confirm what sizes work best.
What size wheels do you have in stock?
I stock 16-, 18-, and 19-inch options for the CX-3. OE replacements in gloss black and machined, plus plus-size upgrades if you want to go wider. Most folks pick 18 or 19 for the look, but I always check offset and brake clearance first.
How long does a wheel install take?
Same day, usually 1 to 2 hours depending on how busy we are. I road-force balance, re-code the TPMS, and torque everything to spec before you drive off. Walk-ins are fine—no appointment needed.
Can I finance wheels?
Yeah. Synchrony Car Care runs a 6-month promo on purchases $199 and up, and Acima lets you lease-to-own starting at $10 down. Both are quick to set up in the shop.
Ready to get rolling?
Book online with the ShopMonkey scheduler, walk in to 1585 Roswell Rd, or give us a call.
Choose Your Option
Financing and Leasing
Options Available
Two purpose-built ways to put new wheels on your CX-3 without the interest hit.
Lease-to-Own
Acima Leasing
Lease-to-Own · Approval in Minutes
90 Days
No Interest if Paid in Full
Lease-to-own program through Acima. As little as $10 to start. Up to $5,000 in approved shopping power. Subject to approval.
Apply NowCredit Application
Synchrony Car Care
Credit Card · Promotional Financing
6 Months
No Interest if Paid in Full on $199+
Use your Synchrony Car Care card at Road Runner for wheels, tires, lift kits, and installation. Get 6 months promotional financing on purchases of $199 or more — pay your balance in full before the promo period ends to avoid interest. Subject to credit approval.
Apply NowHablamos Español · Call 678-400-6467 · Walk-ins Welcome at 1585 Roswell Rd, Marietta, GA
Family-owned · Marietta · Since 2010
Built and run by Max Caba and a small team of techs.
We don't outsource installs and we don't sell wheels we wouldn't put on our own trucks. Every wheel goes on with a torque wrench and a road-force balance, every TPMS sensor gets reset before you drive off, and every fitment question gets answered by someone who'll be here next week when you call back.
Fifteen years of doing it the same way — that's the whole pitch. We're a small shop on Roswell Road, not a chain, not a call center. Walk in and you'll meet the same techs who'll touch your truck.
15
years in Marietta
1
family-owned shop · no chains
100%
in-house installs · road-force balance
Road Runner Wheels & Tires
1585 Roswell Rd, Marietta, GA 30062
Open today
Mon 9–5 · Tue–Fri 9–5:30 · Sat 9–5 · Sun closed
Mon 9–5 · Tue–Fri 9–5:30 · Sat 9–5 · Sun closed
Sign in to your garage
Save your vehicles, favorite wheels and orders across all your devices.
Where are we shipping to?
Enter your ZIP code to see accurate delivery times, local install scheduling, and local warehouse inventory.
Please enter a 5-digit ZIP code.