Lotus Exige Wheels
Fitment by Year
A 2006–2011 Exige rolls on 4x100 bolt pattern with a 56.10mm hub bore, and you've got either 16-inch or 17-inch OE options depending on trim — 195/50-16 or 225/45-17 are the sizes we see most. I've had a few of these come through over the years, and they're straightforward fitment-wise, but offset and brake clearance matter if you're stepping up in diameter.
We stock OE-style replacements in gloss black and machined finishes, plus some forged upgrade options in 17 and 18 inch if you want a little more presence without sacrificing ride. The 56.10 hub bore is tight enough that I run a spigot ring on every install — keeps the wheel centered and eliminates vibration. Offset usually sits between +40 and +45 depending on width; I check clearance against the caliper before we bolt anything down.
When your Exige comes in, my crew runs a road-force balance on every one, reseats and re-codes the TPMS sensors, and torques the lugs to Lotus spec. We've been in Marietta fifteen years doing this work in-house — no shortcuts, no outsourcing. Walk-ins are welcome any day; if you want to call ahead, it's 678-400-6467. We also offer financing through Synchrony on orders $199 and up, or lease-to-own through Acima if that works better for your budget.
We mount these for folks across Marietta, East Cobb, and the Sandy Springs side. Grab a time slot online, call, or just swing by 1585 Roswell Rd and we'll get you sorted.
Need help picking a wheel? Our team can match the right offset, hub bore, and finish for your build.
Call (678) 400-6467Pro Installation
Mount, balance, and TPMS programming handled in-shop at our Marietta location on Roswell Rd. We pair wheels with matching tires when needed.
Financing & Leasing
Synchrony Car Care for 6-month promotional financing on $199+ and Acima lease-to-own with as little as $10 to start.
Hub-Centric Fit
Hub bore measured, spigot rings supplied where needed, lug torque to spec — no vibration, no return trips.
What we double-check on Lotus Exige
- Staggered fitments (different front/rear sizes) are common — we confirm offsets and brake clearance before mounting.
- Hub-centric fit verified on every wheel. UHP brake calipers checked against the inside spoke clearance.
- Track-prepped vehicles get torqued to spec twice — once at mount and once after a 25-mile heat cycle.
Common questions about Lotus Exige wheels
What's the bolt pattern on a 2006–2011 Lotus Exige?
4x100. That's pretty common in the Lotus lineup, so fitment options are decent. The hub bore is 56.10mm, which is why I always run a spigot ring during install.
Can I fit 18-inch wheels on my Exige?
Yeah, you can go up to 18 inch, but you'll want to check brake clearance and offset with me first. OE is 16 or 17 depending on your model year. We keep the common sizes on the rack and can order anything else inside a day or two.
Do you install wheels same-day?
Most of the time, yes — if you call ahead or come in early, we'll have you done in an hour or so. We run road-force balance, TPMS reseat, and torque everything to spec in-house.
Can I finance wheels at Road Runner?
We do. Synchrony Car Care on orders $199 and up (6-month promo), or Acima lease-to-own if you prefer. Walk in or call 678-400-6467 and we'll walk through your options.
Ready to get rolling?
Book online with the ShopMonkey scheduler, walk in to 1585 Roswell Rd, or give us a call.
Choose Your Option
Financing and Leasing
Options Available
Two purpose-built ways to put new wheels on your Exige without the interest hit.
Lease-to-Own
Acima Leasing
Lease-to-Own · Approval in Minutes
90 Days
No Interest if Paid in Full
Lease-to-own program through Acima. As little as $10 to start. Up to $5,000 in approved shopping power. Subject to approval.
Apply NowCredit Application
Synchrony Car Care
Credit Card · Promotional Financing
6 Months
No Interest if Paid in Full on $199+
Use your Synchrony Car Care card at Road Runner for wheels, tires, lift kits, and installation. Get 6 months promotional financing on purchases of $199 or more — pay your balance in full before the promo period ends to avoid interest. Subject to credit approval.
Apply NowHablamos Español · Call 678-400-6467 · Walk-ins Welcome at 1585 Roswell Rd, Marietta, GA
Family-owned · Marietta · Since 2010
Built and run by Max Caba and a small team of techs.
We don't outsource installs and we don't sell wheels we wouldn't put on our own trucks. Every wheel goes on with a torque wrench and a road-force balance, every TPMS sensor gets reset before you drive off, and every fitment question gets answered by someone who'll be here next week when you call back.
Fifteen years of doing it the same way — that's the whole pitch. We're a small shop on Roswell Road, not a chain, not a call center. Walk in and you'll meet the same techs who'll touch your truck.
15
years in Marietta
1
family-owned shop · no chains
100%
in-house installs · road-force balance
Road Runner Wheels & Tires
1585 Roswell Rd, Marietta, GA 30062
Open today
Mon 9–5 · Tue–Fri 9–5:30 · Sat 9–5 · Sun closed
Mon 9–5 · Tue–Fri 9–5:30 · Sat 9–5 · Sun closed
Sign in to your garage
Save your vehicles, favorite wheels and orders across all your devices.
Where are we shipping to?
Enter your ZIP code to see accurate delivery times, local install scheduling, and local warehouse inventory.
Please enter a 5-digit ZIP code.