Kia Rondo Wheels

I see a lot of these 2007–2010 Rondos come through—folks upgrading from the OE 16 or 17-inch setup, or replacing wheels that took a hit on the Cobb roads. Your Rondo runs a 5x114.3 bolt pattern with a 67.1mm hub bore, and that 16 to 19-inch rim range gives you solid room to play with. OE sizes sit around 225/50-17 or 205/60-16 depending on your year, and I keep both fitments in mind when we're building your setup.

We stock everything from OE-style replacements—gloss black, silver, machined finishes—to plus-size upgrades that fill the wheel well better without sacrificing ride quality. If you're going up to an 18 or 19-inch, I'll make sure the offset and brake clearance work with your suspension and your brakes. The hub bore is tight at 67.1mm, so we use spigot rings to center everything properly. Bolt pattern is straightforward, but I don't cut corners on the details.

When your wheels come in, my crew runs them hub-centric, seats the TPMS sensors, recodes them if needed, and road-force balances every one. We've been doing this in-house for fifteen years here in Marietta—no outsourcing, no guessing. Bilingual service, walk-ins welcome, and we torque to spec on every lug nut. Takes about an hour per vehicle if it's a straight swap.

We mount these for folks across Marietta, Roswell, Kennesaw, and the broader Atlanta side. You can finance through Synchrony on orders over $199, or lease-to-own through Acima starting at $10. Walk in, call (678) 400-6467, or book online below.