Skip to content
★★★★★ 4.9 (625 Google reviews) · Marietta shop · 📞 (678) 400-6467 · 🗺️ Get Directions · Live From The Shop
Google ★★★★★ Loading recent review… See all 625 →
Cart

Isuzu I-370 Wheels

Fitment by Year

The 2007–2008 Isuzu I-370 rolls on a 6x139.7 bolt pattern with a 100mm hub bore, and I keep 15- through 18-inch fitments in stock — OE replacements and plus-size upgrades both. Most folks come in running the factory 225/75-15 or looking to step up a half or full size for a sportier stance, and I can dial that in without clearance headaches.

I stock gloss black, machined, and bronze finishes in the diameter range that works for your I-370. Offset matters here — I typically run 0mm to 12mm positive offset depending on whether you want stock ride height or a slight drop. Hub-centric rings are included on every set so the wheel sits true on the spigot, not just the lug nuts. I also keep TPMS sensors in the drawer; if your truck's got them, I reseat and re-code them during install so you don't get a light on the dash.

When your truck comes into the shop, my crew runs road-force balance on every single wheel, torques the lugs to spec, and double-checks the hub-centric fit before you leave. We're bilingual, walk-ins are always welcome, and we've been doing this work in-house on Roswell Road for fifteen years — no outsourcing, no guesswork. I see a lot of I-370s come through from folks in Marietta, East Cobb, and up through Kennesaw, and every one gets the same attention.

Financing through Synchrony Car Care is available on orders $199 and up (6-month promo), or you can lease-to-own through Acima starting at $10. Walk in, call 678-400-6467, or book online below.

Need help picking a wheel? Our team can match the right offset, hub bore, and finish for your build.

Call (678) 400-6467

Pro Installation

Mount, balance, and TPMS programming handled in-shop at our Marietta location on Roswell Rd. We pair wheels with matching tires when needed.

Financing & Leasing

Synchrony Car Care for 6-month promotional financing on $199+ and Acima lease-to-own with as little as $10 to start.

Hub-Centric Fit

Hub bore measured, spigot rings supplied where needed, lug torque to spec — no vibration, no return trips.

What we double-check on Isuzu I-370

  • Staggered fitments (different front/rear sizes) are common — we confirm offsets and brake clearance before mounting.
  • Hub-centric fit verified on every wheel. UHP brake calipers checked against the inside spoke clearance.
  • Track-prepped vehicles get torqued to spec twice — once at mount and once after a 25-mile heat cycle.

Common questions about Isuzu I-370 wheels

What's the bolt pattern on a 2007–2008 Isuzu I-370?
It's 6x139.7 with a 100mm hub bore. That's a Chevy truck pattern, so fitment is pretty straightforward — I carry a lot of options in that bolt circle.
Will these wheels fit my I-370?
If they're 6x139.7 with the right offset and hub bore, yes. I check fitment on every set before install — offset, brake clearance, spigot ring seating, the whole thing.
Can I go bigger than 18 inches on an I-370?
Technically, 18 is the largest OE diameter for your truck. You can fit a 20-inch with the right offset and tire sidewall, but I'll walk you through the speedometer error and suspension impact first — no surprises.
Do you install wheels same-day?
Usually, yeah. I road-force balance every wheel, reseat TPMS if you've got them, torque to spec, and do a final check. Walk-ins are welcome; call 678-400-6467 if you want to confirm timing.

Ready to get rolling?

Book online with the ShopMonkey scheduler, walk in to 1585 Roswell Rd, or give us a call.

Choose Your Option

Financing and Leasing
Options Available

Two purpose-built ways to put new wheels on your I-370 without the interest hit.

Lease-to-Own

Acima Leasing

Lease-to-Own · Approval in Minutes

90 Days

No Interest if Paid in Full

Lease-to-own program through Acima. As little as $10 to start. Up to $5,000 in approved shopping power. Subject to approval.

Apply Now

Credit Application

Synchrony Car Care

Credit Card · Promotional Financing

6 Months

No Interest if Paid in Full on $199+

Use your Synchrony Car Care card at Road Runner for wheels, tires, lift kits, and installation. Get 6 months promotional financing on purchases of $199 or more — pay your balance in full before the promo period ends to avoid interest. Subject to credit approval.

Apply Now

Hablamos Español · Call 678-400-6467 · Walk-ins Welcome at 1585 Roswell Rd, Marietta, GA

Family-owned · Marietta · Since 2010

Built and run by Max Caba and a small team of techs.

We don't outsource installs and we don't sell wheels we wouldn't put on our own trucks. Every wheel goes on with a torque wrench and a road-force balance, every TPMS sensor gets reset before you drive off, and every fitment question gets answered by someone who'll be here next week when you call back.

Fifteen years of doing it the same way — that's the whole pitch. We're a small shop on Roswell Road, not a chain, not a call center. Walk in and you'll meet the same techs who'll touch your truck.

15 years in Marietta
1 family-owned shop · no chains
100% in-house installs · road-force balance
★★★★★ 4.9 (625 Google reviews)

Road Runner Wheels & Tires
1585 Roswell Rd, Marietta, GA 30062

Open today
Mon 9–5 · Tue–Fri 9–5:30 · Sat 9–5 · Sun closed