Infiniti QX80 Wheels

I've been mounting wheels on QX80s since the early days—we're talking 2014 models all the way through the current generation. OE size runs 265/60-20, 275/50-22, or 275/60-20 depending on your year and trim, and the bolt pattern is 6x139.7 with a hub bore of 100.30mm. That's the spec I check first when you roll in.

We stock OE-style replacements in 20, 22, and 24-inch diameters, and I keep a good rotation of plus-size upgrades too—gloss black, machined, bronze finishes. The QX80 sits high, so brake clearance isn't usually an issue, but offset matters. I run the numbers on every fitment before we touch the car. Hub bore is 100.30mm on most years, though I've seen some earlier models at 77.80mm, so I confirm that upfront.

Once we mount, my crew runs each wheel hub-centric with a spigot ring to seat it right. I road-force balance every one—no guessing on a truck this size. We reseat and re-code the TPMS sensors, torque the lugs to spec, and send you out the door. I've been doing this work in Marietta for fifteen years with the same small crew, and we do every install in-house. Walk-ins welcome, no appointment needed.

We mount these for folks across Marietta, Roswell, and the broader Atlanta area. Financing through Synchrony (6 months promo on $199+) or Acima lease-to-own ($50 to start) if you need it. Call me at 678-400-6467, walk in at 1585 Roswell Rd, or book online.