Honda FIT Wheels
Fitment by Year
I see a lot of FITs come through here—they're nimble little cars, and folks want wheels that match that personality. OE size runs 15 to 17 inches on a 4x100 bolt pattern with a 56.10mm hub bore, so you've got room to play without breaking fitment. Most of the stock setups I see are 185/55-16 or 185/60-15, but that doesn't mean you're stuck there.
We stock OE-style replacements in gloss black, machined, and bronze finishes—everything from 15-inch steelies to 17-inch upgrades with proper brake clearance. A plus-one or plus-two setup looks sharp on these without messing with your suspension geometry. Offset matters here; I usually recommend 38mm to 45mm depending on whether you want a flush fit or a little lip. We keep popular sizes on the rack, but I can source something specific if you've got a look in mind.
When your wheels come in, my crew handles the full install in-house. We check hub-centric fit, seat spigot rings, reseat and re-code the TPMS sensors, run road-force balance on every wheel, and torque lugs to Honda spec. Been doing this for fifteen years in Marietta, and I don't cut corners on fitment—it's how you keep these cars handling right. We're bilingual, walk-ins are always welcome, and if you need to finance, Synchrony and Acima both work with us.
We mount these for folks across Marietta, East Cobb, Kennesaw, and up into Sandy Springs. Call me at (678) 400-6467, walk in at 1585 Roswell Rd, or book online below.
Need help picking a wheel? Our team can match the right offset, hub bore, and finish for your build.
Call (678) 400-6467Pro Installation
Mount, balance, and TPMS programming handled in-shop at our Marietta location on Roswell Rd. We pair wheels with matching tires when needed.
Financing & Leasing
Synchrony Car Care for 6-month promotional financing on $199+ and Acima lease-to-own with as little as $10 to start.
Hub-Centric Fit
Hub bore measured, spigot rings supplied where needed, lug torque to spec — no vibration, no return trips.
What we double-check on Honda FIT
- Staggered fitments (different front/rear sizes) are common — we confirm offsets and brake clearance before mounting.
- Hub-centric fit verified on every wheel. UHP brake calipers checked against the inside spoke clearance.
- Track-prepped vehicles get torqued to spec twice — once at mount and once after a 25-mile heat cycle.
Common questions about Honda FIT wheels
What's the bolt pattern on a Honda FIT?
4x100. That's four lugs, 100mm center-to-center. Hub bore is 56.10mm, so you'll need a spigot ring if your aftermarket wheel doesn't have a 56.10 center bore—I always include that on the install.
What rim sizes fit a Honda FIT?
OE goes 15 to 17 inches. I've got 16-inch and 17-inch options in stock most of the time, and I can source 15s if you want that classic look. Offset range is usually 38mm to 45mm depending on your taste.
Can you install wheels same-day?
Yeah, usually. Bring them in or order through us, and my crew will mount, balance, and torque them while you wait. TPMS reseating and road-force balance are part of the job.
Do you offer financing for wheels?
We do. Synchrony has a 6-month promo on purchases $199 and up, and Acima lets you lease-to-own starting at $10. Both work on wheels and tires.
Ready to get rolling?
Book online with the ShopMonkey scheduler, walk in to 1585 Roswell Rd, or give us a call.
Choose Your Option
Financing and Leasing
Options Available
Two purpose-built ways to put new wheels on your FIT without the interest hit.
Lease-to-Own
Acima Leasing
Lease-to-Own · Approval in Minutes
90 Days
No Interest if Paid in Full
Lease-to-own program through Acima. As little as $10 to start. Up to $5,000 in approved shopping power. Subject to approval.
Apply NowCredit Application
Synchrony Car Care
Credit Card · Promotional Financing
6 Months
No Interest if Paid in Full on $199+
Use your Synchrony Car Care card at Road Runner for wheels, tires, lift kits, and installation. Get 6 months promotional financing on purchases of $199 or more — pay your balance in full before the promo period ends to avoid interest. Subject to credit approval.
Apply NowHablamos Español · Call 678-400-6467 · Walk-ins Welcome at 1585 Roswell Rd, Marietta, GA
Family-owned · Marietta · Since 2010
Built and run by Max Caba and a small team of techs.
We don't outsource installs and we don't sell wheels we wouldn't put on our own trucks. Every wheel goes on with a torque wrench and a road-force balance, every TPMS sensor gets reset before you drive off, and every fitment question gets answered by someone who'll be here next week when you call back.
Fifteen years of doing it the same way — that's the whole pitch. We're a small shop on Roswell Road, not a chain, not a call center. Walk in and you'll meet the same techs who'll touch your truck.
15
years in Marietta
1
family-owned shop · no chains
100%
in-house installs · road-force balance
Road Runner Wheels & Tires
1585 Roswell Rd, Marietta, GA 30062
Open today
Mon 9–5 · Tue–Fri 9–5:30 · Sat 9–5 · Sun closed
Mon 9–5 · Tue–Fri 9–5:30 · Sat 9–5 · Sun closed
Sign in to your garage
Save your vehicles, favorite wheels and orders across all your devices.
Where are we shipping to?
Enter your ZIP code to see accurate delivery times, local install scheduling, and local warehouse inventory.
Please enter a 5-digit ZIP code.