Ford Windstar Wheels
Fitment by Year
A 1995–2003 Ford Windstar rolls on a 5x108 bolt pattern with a 63.4mm hub bore, and the OE rim diameter sits between 15 and 18 inches depending on your year and trim. I keep a few sizes on the rack — we see a lot of these minivans come through, and fitment is straightforward once you nail down which generation you've got and what your current setup is.
We stock both straight OE-style replacements (think 15-inch or 16-inch all-season) and plus-size upgrades if you want a little more sidewall presence or a different look. Bolt pattern is tight — 5x108 — so you're not shopping blind; I can rattle off what works in gloss black, machined silver, or bronze finishes. Offset and hub-centric fit matter here just like any van, and brake clearance is rarely an issue on the Windstar, but I always confirm before you leave.
Once you pick your wheels, my crew does the full install in-house. I run road-force balance on every set, reseat and re-code the TPMS, torque the lugs to spec, and make sure that spigot ring seats flush on the hub. We've been doing this in Marietta for fifteen years, and we don't cut corners on fitment. Bilingual service, walk-ins welcome — doesn't matter if you call ahead or just roll up.
We mount these for folks across Marietta, East Cobb, and Roswell. If you need financing, Synchrony runs six-month promos on purchases over $199, and Acima lets you lease-to-own starting at $10. Walk in at 1585 Roswell Rd, call (678) 400-6467, or book online below.
Need help picking a wheel? Our team can match the right offset, hub bore, and finish for your build.
Call (678) 400-6467Pro Installation
Mount, balance, and TPMS programming handled in-shop at our Marietta location on Roswell Rd. We pair wheels with matching tires when needed.
Financing & Leasing
Synchrony Car Care for 6-month promotional financing on $199+ and Acima lease-to-own with as little as $10 to start.
Hub-Centric Fit
Hub bore measured, spigot rings supplied where needed, lug torque to spec — no vibration, no return trips.
What we double-check on Ford Windstar
- Lifted, leveled, or stock — we measure backspacing and confirm the size clears at full lock, not just rolling down the freeway.
- Bolt-pattern, hub bore, and load rating verified against the build. Hub-centric rings supplied where needed.
- TPMS reset done on every install. Bring the lug key if you have aftermarket locks.
Common questions about Ford Windstar wheels
What's the bolt pattern on a Ford Windstar?
1995–2003 Windstars are all 5x108, 63.4mm hub bore. That's consistent across the generation, so once you know your year, fitment is locked in.
Can I fit 18-inch wheels on my Windstar?
Yeah, some later model years came OE with 18s. I'd need to confirm your specific year and trim, but we can make it work and keep brake clearance right.
Do you install wheels same-day?
Most of the time, yes. We mount, balance, and TPMS reseat in-house. Walk in or call (678) 400-6467 to check availability.
Can I finance wheels at Road Runner?
We offer Synchrony (6-month promo on $199+) and Acima (lease-to-own from $50). Ask about either when you're ready.
Ready to get rolling?
Book online with the ShopMonkey scheduler, walk in to 1585 Roswell Rd, or give us a call.
Choose Your Option
Financing and Leasing
Options Available
Two purpose-built ways to put new wheels on your Windstar without the interest hit.
Lease-to-Own
Acima Leasing
Lease-to-Own · Approval in Minutes
90 Days
No Interest if Paid in Full
Lease-to-own program through Acima. As little as $10 to start. Up to $5,000 in approved shopping power. Subject to approval.
Apply NowCredit Application
Synchrony Car Care
Credit Card · Promotional Financing
6 Months
No Interest if Paid in Full on $199+
Use your Synchrony Car Care card at Road Runner for wheels, tires, lift kits, and installation. Get 6 months promotional financing on purchases of $199 or more — pay your balance in full before the promo period ends to avoid interest. Subject to credit approval.
Apply NowHablamos Español · Call 678-400-6467 · Walk-ins Welcome at 1585 Roswell Rd, Marietta, GA
Family-owned · Marietta · Since 2010
Built and run by Max Caba and a small team of techs.
We don't outsource installs and we don't sell wheels we wouldn't put on our own trucks. Every wheel goes on with a torque wrench and a road-force balance, every TPMS sensor gets reset before you drive off, and every fitment question gets answered by someone who'll be here next week when you call back.
Fifteen years of doing it the same way — that's the whole pitch. We're a small shop on Roswell Road, not a chain, not a call center. Walk in and you'll meet the same techs who'll touch your truck.
15
years in Marietta
1
family-owned shop · no chains
100%
in-house installs · road-force balance
Road Runner Wheels & Tires
1585 Roswell Rd, Marietta, GA 30062
Open today
Mon 9–5 · Tue–Fri 9–5:30 · Sat 9–5 · Sun closed
Mon 9–5 · Tue–Fri 9–5:30 · Sat 9–5 · Sun closed
Sign in to your garage
Save your vehicles, favorite wheels and orders across all your devices.
Where are we shipping to?
Enter your ZIP code to see accurate delivery times, local install scheduling, and local warehouse inventory.
Please enter a 5-digit ZIP code.