Ford Mainline Wheels
Fitment by Year
A '52 to '54 Ford Mainline rolls on a 5x114.3 bolt pattern with a 70.5mm hub bore and runs OE sizes like 215/75-15 — that's what I'm working with when you bring one in. I've had a few of these come through over the years, and they're solid platforms if you're looking to upgrade from stock or just need a straight replacement. The rim diameter range goes from 15 inches up to 24 inches, so there's real flexibility depending on what look and ride you're after.
For these Mainlines, I stock both OE-style replacements and plus-size options. You can go gloss black, machined, bronze — whatever matches the truck's vibe. The 5x114.3 pattern is pretty common, so I keep a few sizes on the rack. What matters is getting the offset right so the wheel sits flush in the wheel well and clears the brakes. I'll walk you through that when you come in, and we'll make sure the hub bore seats properly on the spigot ring.
When I mount a set, I run road-force balance on every one, reseat and re-code the TPMS if you've got sensors, and torque the lugs to Ford spec. I do the work myself with my crew right here in the shop — no outsourcing, no waiting around. We've been here in Marietta fifteen years, bilingual service, and I answer the phone. Walk-ins are always welcome.
We mount wheels for folks across Marietta and East Cobb, and we've got financing through Synchrony (6 months promo on $199 and up) and Acima lease-to-own if that works better for you. Call me at (678) 400-6467, walk in at 1585 Roswell Rd, or book online below.
Need help picking a wheel? Our team can match the right offset, hub bore, and finish for your build.
Call (678) 400-6467Popular wheels for the Ford Mainline
In-stock wheels on the 5x114.3 bolt pattern. Pick your year and trim above to confirm offset and hub bore for your exact truck before you buy.
See all 1 5x114.3 wheels →
Pro Installation
Mount, balance, and TPMS programming handled in-shop at our Marietta location on Roswell Rd. We pair wheels with matching tires when needed.
Financing & Leasing
Synchrony Car Care for 6-month promotional financing on $199+ and Acima lease-to-own with as little as $10 to start.
Hub-Centric Fit
Hub bore measured, spigot rings supplied where needed, lug torque to spec — no vibration, no return trips.
What we double-check on Ford Mainline
- Lifted, leveled, or stock — we measure backspacing and confirm the size clears at full lock, not just rolling down the freeway.
- Bolt-pattern, hub bore, and load rating verified against the build. Hub-centric rings supplied where needed.
- TPMS reset done on every install. Bring the lug key if you have aftermarket locks.
Common questions about Ford Mainline wheels
What's the bolt pattern on a 1952–1954 Ford Mainline?
5x114.3 — that's what I spec when you bring one in. Hub bore is 70.5mm, so I make sure the spigot ring seats properly on every install.
Can I fit 24-inch wheels on my Ford Mainline?
Yeah, the OE rim diameter range goes 15 to 24 inches, so 24s will bolt on. I'll check your brake clearance and offset to make sure they sit right and don't rub.
Do you install wheels same-day?
Most of the time, yes. I run road-force balance, TPMS reseat, and lug torque in-house. Call ahead if you're bringing in a full set and I'll make sure we're ready.
Can I finance wheels at Road Runner?
Absolutely. Synchrony Car Care gives you 6 months promo on $199 and up, and Acima lease-to-own starts at $50. Both are available when you come in or call.
Ready to get rolling?
Book online with the ShopMonkey scheduler, walk in to 1585 Roswell Rd, or give us a call.
Choose Your Option
Financing and Leasing
Options Available
Two purpose-built ways to put new wheels on your Mainline without the interest hit.
Lease-to-Own
Acima Leasing
Lease-to-Own · Approval in Minutes
90 Days
No Interest if Paid in Full
Lease-to-own program through Acima. As little as $10 to start. Up to $5,000 in approved shopping power. Subject to approval.
Apply NowCredit Application
Synchrony Car Care
Credit Card · Promotional Financing
6 Months
No Interest if Paid in Full on $199+
Use your Synchrony Car Care card at Road Runner for wheels, tires, lift kits, and installation. Get 6 months promotional financing on purchases of $199 or more — pay your balance in full before the promo period ends to avoid interest. Subject to credit approval.
Apply NowHablamos Español · Call 678-400-6467 · Walk-ins Welcome at 1585 Roswell Rd, Marietta, GA
Family-owned · Marietta · Since 2010
Built and run by Max Caba and a small team of techs.
We don't outsource installs and we don't sell wheels we wouldn't put on our own trucks. Every wheel goes on with a torque wrench and a road-force balance, every TPMS sensor gets reset before you drive off, and every fitment question gets answered by someone who'll be here next week when you call back.
Fifteen years of doing it the same way — that's the whole pitch. We're a small shop on Roswell Road, not a chain, not a call center. Walk in and you'll meet the same techs who'll touch your truck.
15
years in Marietta
1
family-owned shop · no chains
100%
in-house installs · road-force balance
Road Runner Wheels & Tires
1585 Roswell Rd, Marietta, GA 30062
Open today
Mon 9–5 · Tue–Fri 9–5:30 · Sat 9–5 · Sun closed
Mon 9–5 · Tue–Fri 9–5:30 · Sat 9–5 · Sun closed
Sign in to your garage
Save your vehicles, favorite wheels and orders across all your devices.
Where are we shipping to?
Enter your ZIP code to see accurate delivery times, local install scheduling, and local warehouse inventory.
Please enter a 5-digit ZIP code.