Ford EDGE Wheels

I've been fitting wheels on the EDGE since we opened in 2010, and the bolt pattern is 5x108 with a 63.4mm hub bore—20 to 22 inch diameters work depending on your year and trim. OE sizes run 245/50-20 or 265/40-21, and I keep those fitments on the rack because I see these come through regularly, especially folks running the 20s that came stock on the higher trims.

We stock both OE-style replacements and plus-size upgrades for the EDGE. You can go gloss black, machined, or bronze finishes—all in the 20 to 22 inch range. Offset matters here; the EDGE runs a deeper stance than you'd think, so I check brake clearance and make sure the spigot ring sits flush on the hub bore. Most of the time we're looking at an 18 or 20mm offset to keep the wheel tucked without rubbing the inside of the fender.

When your wheels come in, I run road-force balance on every one, reseat and re-code the TPMS sensors, and torque the lugs to Ford spec. We're a small crew—I'm here most days—so you get the same person checking your fit every time. Bilingual shop, walk-ins always welcome. We've been in Marietta for fifteen years, and that means I know what the Cobb County roads do to a wheel setup.

We mount these for folks across Marietta, East Cobb, and Roswell. Financing through Synchrony Car Care (6-month promo on $199+) or lease-to-own through Acima ($50 to start). Walk in, call 678-400-6467, or book online below.