Ford Contour Wheels
Fitment by Year
I've got Ford Contour wheels in stock for the 1995 through 2000 model years — 4x108 bolt pattern, 63.4mm hub bore, and we run everything from 14-inch up to 18-inch diameter depending on what you're after. Came in a '98 last month wanting to go plus-one, and we had it sorted in an afternoon. That bolt pattern's straightforward to work with, and the hub bore is tight enough that I always run hub-centric rings to keep things solid.
For OE replacement, I stock 14 and 15-inch sizes that'll bolt right up — your original might've been a 185/70-14 or 195/65-14 depending on trim and year. If you want to step up, 16 or 17-inch is where most folks land without rubbing issues. I keep gloss black, machined, and bronze finishes on the rack because that's what moves. Offset matters on a Contour — you want something between 35 and 45mm to clear the brakes and sit flush. I'll check your current setup and make sure we're not fighting the suspension.
Once you pick your wheel, my crew handles the whole install. We pull the old tire, mount and balance the new one on a road-force machine — I run that on every one, no shortcuts. Hub-centric fit gets checked, spigot rings seated, TPMS reseat and re-code if you've got sensors, and lug torque to Ford spec. We're bilingual here, walk-ins are always welcome, and we've been doing this in Marietta for fifteen years, so you're not guessing whether it'll fit.
We mount these for folks across Marietta, Kennesaw, and the Sandy Springs side. If you want to finance, Synchrony runs a six-month promo on anything over $199, and Acima's got a lease-to-own option starting at ten bucks. Walk in at 1585 Roswell Road, call me at (678) 400-6467, or book online below.
Need help picking a wheel? Our team can match the right offset, hub bore, and finish for your build.
Call (678) 400-6467Pro Installation
Mount, balance, and TPMS programming handled in-shop at our Marietta location on Roswell Rd. We pair wheels with matching tires when needed.
Financing & Leasing
Synchrony Car Care for 6-month promotional financing on $199+ and Acima lease-to-own with as little as $10 to start.
Hub-Centric Fit
Hub bore measured, spigot rings supplied where needed, lug torque to spec — no vibration, no return trips.
What we double-check on Ford Contour
- Lifted, leveled, or stock — we measure backspacing and confirm the size clears at full lock, not just rolling down the freeway.
- Bolt-pattern, hub bore, and load rating verified against the build. Hub-centric rings supplied where needed.
- TPMS reset done on every install. Bring the lug key if you have aftermarket locks.
Common questions about Ford Contour wheels
What's the bolt pattern on a Ford Contour?
4x108. That's what I see on every year from '95 to 2000. Hub bore is 63.4mm, so you want hub-centric rings to keep the wheel centered on the hub. I always include those in the install.
Will these wheels fit my 1997 Ford Contour?
Yeah, as long as they're 4x108 and the offset is between 35 and 45mm. I'll verify the fitment before we mount anything. Rim diameter can range from 14 to 18 inches depending on your brake clearance and what you're going for.
Do you do same-day wheel installation?
Most of the time, yes. I've got a small crew and we do every install in-house. Bring your car in or call (678) 400-6467 and I'll let you know if we can get you in that day.
Can I finance wheels at Road Runner?
Synchrony Car Care runs a six-month promo on purchases over $199, and Acima does lease-to-own starting at fifty dollars. Both work, and I can walk you through it when you come in.
Ready to get rolling?
Book online with the ShopMonkey scheduler, walk in to 1585 Roswell Rd, or give us a call.
Choose Your Option
Financing and Leasing
Options Available
Two purpose-built ways to put new wheels on your Contour without the interest hit.
Lease-to-Own
Acima Leasing
Lease-to-Own · Approval in Minutes
90 Days
No Interest if Paid in Full
Lease-to-own program through Acima. As little as $10 to start. Up to $5,000 in approved shopping power. Subject to approval.
Apply NowCredit Application
Synchrony Car Care
Credit Card · Promotional Financing
6 Months
No Interest if Paid in Full on $199+
Use your Synchrony Car Care card at Road Runner for wheels, tires, lift kits, and installation. Get 6 months promotional financing on purchases of $199 or more — pay your balance in full before the promo period ends to avoid interest. Subject to credit approval.
Apply NowHablamos Español · Call 678-400-6467 · Walk-ins Welcome at 1585 Roswell Rd, Marietta, GA
Family-owned · Marietta · Since 2010
Built and run by Max Caba and a small team of techs.
We don't outsource installs and we don't sell wheels we wouldn't put on our own trucks. Every wheel goes on with a torque wrench and a road-force balance, every TPMS sensor gets reset before you drive off, and every fitment question gets answered by someone who'll be here next week when you call back.
Fifteen years of doing it the same way — that's the whole pitch. We're a small shop on Roswell Road, not a chain, not a call center. Walk in and you'll meet the same techs who'll touch your truck.
15
years in Marietta
1
family-owned shop · no chains
100%
in-house installs · road-force balance
Road Runner Wheels & Tires
1585 Roswell Rd, Marietta, GA 30062
Open today
Mon 9–5 · Tue–Fri 9–5:30 · Sat 9–5 · Sun closed
Mon 9–5 · Tue–Fri 9–5:30 · Sat 9–5 · Sun closed
Sign in to your garage
Save your vehicles, favorite wheels and orders across all your devices.
Where are we shipping to?
Enter your ZIP code to see accurate delivery times, local install scheduling, and local warehouse inventory.
Please enter a 5-digit ZIP code.