Dodge Stratus Wheels

OE Dodge Stratus wheels run either 5x114.3 or 5x100 bolt pattern depending on your year—'95 through 2006 we see both—with a 57.10mm hub bore and rim diameters from 15 to 18 inches stock. I've had plenty of these come through over the years, and the fitment window is pretty forgiving once you know which generation you're working with. Most of the earlier models sit on 205/55-16 or 205/60-16, while the later ones can handle 215/50-17 or even 18-inch setups if you're looking to upgrade.

For replacements, I keep OE-style 16 and 17-inch options on the rack—gloss black, machined silver, bronze if you want something with a little personality. If you're going plus-size, we run the numbers on offset and brake clearance before you buy; a lot of folks want to go wider, and I make sure the spigot ring and hub-centric fit are dead-on so you're not chasing vibration down the road. The bolt pattern doesn't change much across the generation, but I always double-check your specific year because that hub bore and offset interaction matters.

When your wheels come in, my crew runs them hub-centric, seats the TPMS sensors, road-force balances every one, and torques the lugs to Dodge spec. We're bilingual in the shop, walk-ins are always welcome, and we've been doing this in Marietta for fifteen years—family operation, no franchise nonsense. You get the same person answering the phone who'll be in the bay checking your fit.

We mount these for folks across Marietta and East Cobb, down to Sandy Springs and Roswell. If you need financing, Synchrony runs a six-month promo on orders over $199, and Acima lease-to-own starts at ten bucks. Walk in at 1585 Roswell Road, call 678-400-6467, or book online below.