Dodge Stealth Wheels

A '91 to '96 Dodge Stealth runs 5x114.3 bolt pattern with a 67.1mm hub bore — that's your baseline, and I make sure every wheel we fit respects those specs down to the millimeter. OE sizes span 205/65-15 up through 245/45-17 depending on your year and trim, so there's real range to work with here. I had a '94 come in last month wanting to go from the stock 16-inch to a set of 17s, and the math checked out clean.

We keep 15, 16, 17, and 18-inch fitments on the rack for these cars. You can go straight OE-style replacement — same diameter, same offset, hub-centric rings to keep that spigot tight — or step up to a plus-size upgrade if your year's clearance allows it. I stock gloss black, machined aluminum, and bronze finishes. Offset matters on a Stealth because the suspension geometry is tight; I run the numbers before you buy so you're not rubbing or sitting too far out. Brake clearance is usually fine, but I always check.

Once you pick your wheel, my crew handles the full install in-house. We seat the TPMS sensors, re-code them to your car, run road-force balance on every single one, and torque the lugs to Dodge spec. Been doing this in Marietta for fifteen years now, and I don't cut corners on the details. Bilingual service, walk-ins welcome — I'll have you rolling in under an hour most days.

We mount these for folks across Marietta, East Cobb, and Sandy Springs. If you need financing, Synchrony runs a six-month promo on orders over $199, and Acima lets you start for ten bucks. Walk in at 1585 Roswell Rd, call (678) 400-6467, or book online below.