Dodge RAM Wheels
Fitment by Year
I work with a lot of RAM owners, and the bolt pattern on these trucks—5x139.7 with a 77.80mm hub bore—is something I've got dialed in. Between 1990 and 2010, you're looking at rim diameters from 17 up to 30 inches, and OE sizes typically run 245/70-17, 265/70-17, or 275/60-20 depending on your year and trim. I keep the popular sizes on the rack, and I can source anything else in a day or two.
When you come in, we talk about what you want—straight OE replacement or a plus-size upgrade. I stock gloss black, machined, and bronze finishes, and I always check brake clearance and offset against your specific year and suspension setup. Most RAM owners want something that looks right without eating into wheel well or rubbing the frame. We spec everything before you leave.
My crew runs road-force balance on every one of these, seats the TPMS sensors fresh, and torques the lugs to Dodge spec. Hub-centric fitment and spigot rings—that's the foundation. I've been doing this in Marietta for fifteen years, and I do every install in-house. We're bilingual, walk-ins are welcome, and I answer the phone myself.
We mount these for folks across Marietta and the surrounding areas. If you need financing, Synchrony Car Care runs a 6-month promo on orders $199 and up, and Acima lets you lease-to-own starting at $10. Walk in at 1585 Roswell Rd, call (678) 400-6467, or book online.
Need help picking a wheel? Our team can match the right offset, hub bore, and finish for your build.
Call (678) 400-6467Pro Installation
Mount, balance, and TPMS programming handled in-shop at our Marietta location on Roswell Rd. We pair wheels with matching tires when needed.
Financing & Leasing
Synchrony Car Care for 6-month promotional financing on $199+ and Acima lease-to-own with as little as $10 to start.
Hub-Centric Fit
Hub bore measured, spigot rings supplied where needed, lug torque to spec — no vibration, no return trips.
What we double-check on Dodge RAM
- Staggered fitments (different front/rear sizes) are common — we confirm offsets and brake clearance before mounting.
- Hub-centric fit verified on every wheel. UHP brake calipers checked against the inside spoke clearance.
- Track-prepped vehicles get torqued to spec twice — once at mount and once after a 25-mile heat cycle.
Common questions about Dodge RAM wheels
What's the bolt pattern on a Dodge RAM from the 1990s–2010?
5x139.7 with a 77.80mm hub bore. That's consistent across that whole generation, which makes fitment straightforward. I keep common sizes in stock.
Will these wheels fit my RAM?
If it's a RAM between 1990 and 2010, yes—as long as we match your rim diameter and offset to your year and suspension. I always verify brake clearance and wheel-well fit before you drive away.
What rim sizes do you have for RAM trucks?
I stock 17 through 30 inch, depending on what's in demand that week. OE replacements or plus-size upgrades—I can source almost anything in a day or two if I don't have it on the floor.
Do you install wheels same-day?
Usually, yes. I road-force balance every wheel, reseat the TPMS, and torque to spec in-house. Call ahead if you're coming in with a full set, just so I can block the time.
Can I finance wheels at Road Runner?
Absolutely. Synchrony Car Care covers orders $199 and up with a 6-month promo, and Acima lets you lease-to-own starting at $10. Ask when you call or stop by.
Ready to get rolling?
Book online with the ShopMonkey scheduler, walk in to 1585 Roswell Rd, or give us a call.
Choose Your Option
Financing and Leasing
Options Available
Two purpose-built ways to put new wheels on your RAM without the interest hit.
Lease-to-Own
Acima Leasing
Lease-to-Own · Approval in Minutes
90 Days
No Interest if Paid in Full
Lease-to-own program through Acima. As little as $10 to start. Up to $5,000 in approved shopping power. Subject to approval.
Apply NowCredit Application
Synchrony Car Care
Credit Card · Promotional Financing
6 Months
No Interest if Paid in Full on $199+
Use your Synchrony Car Care card at Road Runner for wheels, tires, lift kits, and installation. Get 6 months promotional financing on purchases of $199 or more — pay your balance in full before the promo period ends to avoid interest. Subject to credit approval.
Apply NowHablamos Español · Call 678-400-6467 · Walk-ins Welcome at 1585 Roswell Rd, Marietta, GA
Family-owned · Marietta · Since 2010
Built and run by Max Caba and a small team of techs.
We don't outsource installs and we don't sell wheels we wouldn't put on our own trucks. Every wheel goes on with a torque wrench and a road-force balance, every TPMS sensor gets reset before you drive off, and every fitment question gets answered by someone who'll be here next week when you call back.
Fifteen years of doing it the same way — that's the whole pitch. We're a small shop on Roswell Road, not a chain, not a call center. Walk in and you'll meet the same techs who'll touch your truck.
15
years in Marietta
1
family-owned shop · no chains
100%
in-house installs · road-force balance
Road Runner Wheels & Tires
1585 Roswell Rd, Marietta, GA 30062
Open today
Mon 9–5 · Tue–Fri 9–5:30 · Sat 9–5 · Sun closed
Mon 9–5 · Tue–Fri 9–5:30 · Sat 9–5 · Sun closed
Sign in to your garage
Save your vehicles, favorite wheels and orders across all your devices.
Where are we shipping to?
Enter your ZIP code to see accurate delivery times, local install scheduling, and local warehouse inventory.
Please enter a 5-digit ZIP code.