Daewoo Lanos Wheels

OE Daewoo Lanos from 1998 to 2003 rolls on a 4x100 bolt pattern with a 56.60mm hub bore, and you're looking at 14- to 16-inch rim diameters depending on which year and trim you've got. I keep a solid range of sizes in stock because these cars still show up on my rack pretty regular — folks either want to replace worn OE wheels or step up to something with a bit more visual punch without losing that hub-centric fit.

When you come in, I can match you with either straight OE-style replacements (which run 14 inches on base models, up to 16 on some of the later years) or go plus-size if you want. We stock gloss black, machined finishes, and bronze options. The offset and backspacing matter here — I run the numbers to make sure there's no rubbing on the strut or caliper, and we keep brake clearance tight. Most of what I carry for the Lanos sits in that 38 to 42mm offset range, which plays nice with the factory suspension geometry.

My crew handles the full install in-house. We seat the TPMS sensors, re-code them if needed, run a road-force balance on every wheel, and torque the lugs to spec. I've been doing this in Marietta for fifteen years with my family, and we don't cut corners on fitment — hub-centric rings go on if they're needed, and I make sure everything spins true before you drive out. We're bilingual, and walk-ins are always welcome.

We mount these for folks across Marietta, East Cobb, and Sandy Springs. If you need financing, Synchrony Car Care runs a 6-month promo on purchases over $199, and Acima can get you rolling for $10 down if that works better. Walk in, call (678) 400-6467, or book online.