Chevrolet TRAX Wheels
Fitment by Year
We fit Chevrolet TRAX models from 2015 through 2027 with 5x105 bolt pattern, 56.50mm hub bore, and OE rim diameters from 16 to 19 inches. I've mounted hundreds of these—the 205/70-16 is the factory baseline, but I see a lot of folks wanting to go up a size or two for a sportier look and better sidewall response on the road.
I stock OE-style replacements in 16, 17, and 18 inch, plus some 19-inch upgrade options in gloss black, machined, and bronze finishes. The TRAX has decent brake clearance, so we can work with most offset specs—usually I'm running somewhere between 35 and 45mm depending on what you're after. If you're thinking plus-sizing, I'll pull the exact offset numbers and run the fitment math before we order anything.
When your wheels come in, my crew checks hub-centric fit first, seats the spigot rings, resets and re-codes the TPMS sensors, then road-force balances every one and torques the lugs to spec. We've been in Marietta for fifteen years, and I do every install in-house—no shortcuts. We're bilingual, walk-ins are welcome, and if you've got questions about fitment or finish, you'll get me on the phone.
We mount these for folks across Marietta and the broader Atlanta side. If you want to finance, we run Synchrony Car Care (6-month promo on $199 and up) and Acima lease-to-own ($50 to start). Walk in, call 678-400-6467, or book online below.
Need help picking a wheel? Our team can match the right offset, hub bore, and finish for your build.
Call (678) 400-6467Pro Installation
Mount, balance, and TPMS programming handled in-shop at our Marietta location on Roswell Rd. We pair wheels with matching tires when needed.
Financing & Leasing
Synchrony Car Care for 6-month promotional financing on $199+ and Acima lease-to-own with as little as $10 to start.
Hub-Centric Fit
Hub bore measured, spigot rings supplied where needed, lug torque to spec — no vibration, no return trips.
What we double-check on Chevrolet TRAX
- Lifted, leveled, or stock — we measure backspacing and confirm the size clears at full lock, not just rolling down the freeway.
- Bolt-pattern, hub bore, and load rating verified against the build. Hub-centric rings supplied where needed.
- TPMS reset done on every install. Bring the lug key if you have aftermarket locks.
Common questions about Chevrolet TRAX wheels
What's the bolt pattern on a Chevrolet TRAX?
5x105. That's five lugs, 105mm center-to-center. Hub bore is 56.50mm. I keep those specs on hand for every TRAX from 2015 to 2027.
What size wheels fit my TRAX?
OE range is 16 to 19 inches. Factory is usually 16 or 17. I can fit anything in that range as long as the offset and width work with your brake setup and suspension. I'll confirm before we order.
Do you install wheels same-day?
If we have your size in stock and you come in before 4 PM, yes. We mount, balance, reset TPMS, and torque everything to spec in-house. Call 678-400-6467 if you want to check availability first.
Can I finance wheels at Road Runner?
Yes. Synchrony Car Care for purchases $199 and up (6-month promo available), and Acima lease-to-own starting at $10. Both are quick to set up.
Ready to get rolling?
Book online with the ShopMonkey scheduler, walk in to 1585 Roswell Rd, or give us a call.
Choose Your Option
Financing and Leasing
Options Available
Two purpose-built ways to put new wheels on your TRAX without the interest hit.
Lease-to-Own
Acima Leasing
Lease-to-Own · Approval in Minutes
90 Days
No Interest if Paid in Full
Lease-to-own program through Acima. As little as $10 to start. Up to $5,000 in approved shopping power. Subject to approval.
Apply NowCredit Application
Synchrony Car Care
Credit Card · Promotional Financing
6 Months
No Interest if Paid in Full on $199+
Use your Synchrony Car Care card at Road Runner for wheels, tires, lift kits, and installation. Get 6 months promotional financing on purchases of $199 or more — pay your balance in full before the promo period ends to avoid interest. Subject to credit approval.
Apply NowHablamos Español · Call 678-400-6467 · Walk-ins Welcome at 1585 Roswell Rd, Marietta, GA
Family-owned · Marietta · Since 2010
Built and run by Max Caba and a small team of techs.
We don't outsource installs and we don't sell wheels we wouldn't put on our own trucks. Every wheel goes on with a torque wrench and a road-force balance, every TPMS sensor gets reset before you drive off, and every fitment question gets answered by someone who'll be here next week when you call back.
Fifteen years of doing it the same way — that's the whole pitch. We're a small shop on Roswell Road, not a chain, not a call center. Walk in and you'll meet the same techs who'll touch your truck.
15
years in Marietta
1
family-owned shop · no chains
100%
in-house installs · road-force balance
Road Runner Wheels & Tires
1585 Roswell Rd, Marietta, GA 30062
Open today
Mon 9–5 · Tue–Fri 9–5:30 · Sat 9–5 · Sun closed
Mon 9–5 · Tue–Fri 9–5:30 · Sat 9–5 · Sun closed
Sign in to your garage
Save your vehicles, favorite wheels and orders across all your devices.
Where are we shipping to?
Enter your ZIP code to see accurate delivery times, local install scheduling, and local warehouse inventory.
Please enter a 5-digit ZIP code.