Buick Passage Wheels

OE size on a 2008–2013 Passage is 16 to 18 inches with a 5x114.3 bolt pattern and 70.30mm hub bore. I keep a solid stock of direct replacements and plus-size upgrades for these years, and I can tell you exactly what clears your brakes and sits right on the hub before you leave here.

For a Passage, I typically run 17 or 18-inch fitments. You can go OE-style — gloss black, machine-faced, or silver — or step up to something with a little more attitude. Bronze, matte, deep dish setups all work here, and the offset range I carry covers everything from stock geometry to a mild stance. Hub bore is tight at 70.30, so I always use spigot rings to keep the wheel centered on the hub itself. That's non-negotiable for me — it's how you avoid vibration down the road.

When your wheels come in, my crew runs them through the full process. I road-force balance every one on the machine, check that spigot ring fit, reseat and re-code the TPMS sensors, and torque the lugs to spec. We've been doing this in-house for fifteen years here at the same Roswell Road location, and it shows in how these wheels sit. Walk-ins are always welcome, and we handle the work in English or Spanish — same day if you're not chasing something exotic.

We mount these for folks across Marietta, East Cobb, and Roswell. If you want to spread the cost, I can run Synchrony financing on purchases over $199, or Acima lease-to-own starts at $10 down. Call me at 678-400-6467, walk in, or book online below.