Buick Century Wheels

OE size on a '97–'05 Century is 15 inches, 5x114.3 bolt pattern, 70.30mm hub bore. I keep 15, 16, 17, and 18-inch options on the rack for this platform — both straight replacements and plus-size upgrades depending on what you're after. Most folks coming in either need a like-for-like swap because their stock wheels are bent, or they want to go up a size or two for a different look.

For fitment, you've got room to work with. I typically recommend staying between 15 and 18 inches on a Century — that 70.30 hub bore is consistent across the generation, so we use hub-centric rings to lock everything true. Brake clearance isn't tight on these, so whether you go with a gloss black finish, machined aluminum, or something with a bronze tone, we're not fighting geometry. Offset usually runs +35 to +45 depending on the rim width; I'll dial that in when you're here so the wheels sit flush and don't rub.

When your wheels come in, my crew runs a road-force balance on every single one — no shortcuts. We reseat and re-code the TPMS sensors, check that hub-centric fit, and torque the lugs to spec. Been doing this the same way for fifteen years here in Marietta, and it shows. Walk-ins are always welcome; we do installs in-house, and we speak English and Spanish.

We mount these for folks across Marietta, East Cobb, and the surrounding Atlanta area. If you need financing, we've got Synchrony (6-month promo on $199 and up) and Acima (lease-to-own, $50 to start). Walk in at 1585 Roswell Rd, call me at 678-400-6467, or book online below.